STS3X Temperature Sensor
The sts3x sensor platform Temperature sensor allows you to use your Sensirion STS30-DIS, STS31-DIS or STS35-DIS
(datasheet
,
Sensirion STS3x) sensors with
ESPHome. The I²C Bus is
required to be set up in your configuration for this sensor to work.
# Example configuration entry
sensor:
- platform: sts3x
name: "Living Room Temperature"
address: 0x4A
update_interval: 60sConfiguration variables:
- address (Optional, int): Manually specify the I²C address of the sensor.
Defaults to
0x4A. - update_interval (Optional, Time): The interval to check the
sensor. Defaults to
60s. - All other options from Sensor.